MDSAP AU P0002 · ISO 13485:2016 · Australia · Brazil · Canada · Japan · United States
MDSAP in Practice: The Audit Approach
An MDSAP audit follows a fixed structure: seven chapters, each a sequence of tasks, and every task tied to ISO 13485:2016 clauses and to the requirements of five regulatory authorities. This course works through the Audit Approach task by task — the task statement, the Clause and Regulation references, the additional country-specific requirements and what conformity consists of — and shows where each one lands in a working quality management system.
Scope
What the course covers
Where a requirement is quoted, it is quoted in full and then explained. Where something is an interpretation rather than a rule, the course says so.
01
The structure and the audit cycle
The audit sequence and the linkages between processes, how a task is built, and the cycle of initial audit, surveillance audits and re-audit, with special and unannounced audits.
02
Management and the regulatory processes
QMS planning, outsourcing, competence, document and record control, management review; marketing authorization, facility registration and notification of changes in each jurisdiction.
03
Measurement, analysis and improvement, and reporting
Quality data, investigations, CAPA, nonconforming product, internal audit and complaints; adverse event reporting and advisory notices, with the timeframes of each regulator.
04
Design, production and purchasing
Design and development from planning to transfer and change, production and service controls including validation and traceability, and supplier control.
05
The annexes
Technical documentation, sterile devices, the Japanese QMS Ordinance and the acceptable exclusions of devices and jurisdictions.
Outline
19 modules, in the order the process runs
The course follows the sequence of the work rather than the numbering of the regulation, and ends where the work ends.
Introduction
What the course covers and how each task is readStructure of the Audit Approach
Audit sequence, linkages, structure of a task, terminologyThe MDSAP audit cycle
Initial audit, surveillance, re-audit, special and unannounced auditsManagement, Tasks 1 to 6
Planning, management representative, policy, structure, outsourcing, competenceManagement, Tasks 7 to 11
Risk management, documents and records, management review, distributionMarketing authorization and facility registration
Chapter 2, Tasks 1 and 2, by jurisdictionNotification of changes
Chapter 2, Task 3, by jurisdictionMeasurement, analysis and improvement, Tasks 1 to 11
Quality data, investigation, CAPA, nonconforming product, internal auditMeasurement, analysis and improvement, Tasks 12 to 16
Post-production information and complaintsAdverse event reporting
Chapter 4, Task 1, and the reporting timeframesAdvisory notices
Chapter 4, Task 2, by jurisdictionDesign and development, Tasks 1 to 9
Scope, planning, inputs, outputs, risk managementDesign and development, Tasks 10 to 17
Validation, clinical evaluation, software, changes, transferProduction and service controls, Tasks 1 to 9
Planning, controlled conditions, environment, process validationProduction and service controls, Tasks 10 to 18
Monitoring, equipment, software, device master file, traceabilityProduction and service controls, Tasks 19 to 29
Status, acceptance, nonconformity, preservation, distribution, servicingPurchasing, Tasks 1 to 12
Planning, supplier selection, monitoring, purchasing informationAnnex 1 and Annex 2
Technical documentation and technologies; sterile devicesAnnex 4 and Annex 5
Japanese QMS Ordinance; acceptable exclusionsFinal test
Covering the whole courseOutcomes
What you will be able to do
01
A map of the audit
Which process each task belongs to, in what order it is audited, and which other processes it links to.
02
A reference for every task
The ISO 13485:2016 clauses and the regulation of each jurisdiction behind it.
03
The country requirements, side by side
What applies only in Australia, Brazil, Canada, Japan or the United States, task by task.
04
A procedure or record for every task
The workbook lists every task of the seven chapters with a line for the document in your QMS that answers it.
05
A justified scope
Which devices and jurisdictions may be excluded, and on what condition.
Format
Designed to be worked through, not watched
Self-paced and fully online, with progress saved to your account and every module replayable. Transcripts are downloadable, so the content stays searchable long after the video is finished. Access does not expire, and revisions made after your purchase are included.
Audience
Who the course is for
- Quality and regulatory managers of organisations in, or entering, the MDSAP
- Process owners who need the tasks of their own process
- Internal auditors planning audits against the Audit Approach
- Consultants supporting organisations across several jurisdictions
It assumes familiarity with medical device regulation and with a quality management system. It does not assume prior study of the articles and annexes it covers.
Certificate
Verifiable by a third party
On passing the final test, the certificate carries a verification code derived from your name and the date of completion.
An employer, an auditor or a client can confirm it on a public page, and it can be filed as training evidence under your quality system.
MDR-XXXX-XXXX · mdregulatory.com/verify
Questions
Before you enrol
Does the course cover all five jurisdictions?
Yes. Australia, Brazil, Canada, Japan and the United States, with the additional country-specific requirements of each task.
Do I need the MDSAP Documentation Kit?
No. Some modules show extracts from the kit templates, and the workbook works with any quality management system.
Do I need a copy of ISO 13485:2016?
Not for the course. You will need it to map the clauses to your own procedures.
How long do I have access?
Access does not expire. The course stays in your account, including any updates made to the modules after your purchase.
Is there a certificate?
Yes. Passing the final test issues a certificate with a verification code, which anyone can check on our verification page.
Can I watch the modules in any order?
The modules unlock in sequence, because each one builds on the previous. Once unlocked, a module stays available and can be rewatched.
Do I need any prior knowledge?
The course assumes you work in the sector and know what a technical file and a notified body are. No knowledge of the specific technology is assumed.
Can my company buy several seats?
Yes. Write to us and we will set up team access with a single invoice.
Course and kit
The course explains the reasoning. The kit gives you the structure.
The workbook included with the course is a gap analysis of your own documentation, arranged in the order an assessment runs. Working through it produces a list of what is missing or partial in your file.
That list maps to the templates in the MDSAP Documentation Kit.
Enrol
Every task of the seven chapters, with the requirements of each jurisdiction — in the order the audit runs.
19 modules, 3h 45min of video, downloadable transcripts, workbook and certificate. Self-paced, with no expiry.