MDSAP in Practice: The Audit Approach — MD Regulatory Academy

MDSAP AU P0002 · ISO 13485:2016 · Australia · Brazil · Canada · Japan · United States

MDSAP in Practice: The Audit Approach

An MDSAP audit follows a fixed structure: seven chapters, each a sequence of tasks, and every task tied to ISO 13485:2016 clauses and to the requirements of five regulatory authorities. This course works through the Audit Approach task by task — the task statement, the Clause and Regulation references, the additional country-specific requirements and what conformity consists of — and shows where each one lands in a working quality management system.

19 modules 3h 45min of video Self-paced Workbook included Certificate on completion

Scope

What the course covers

Where a requirement is quoted, it is quoted in full and then explained. Where something is an interpretation rather than a rule, the course says so.

01

The structure and the audit cycle

The audit sequence and the linkages between processes, how a task is built, and the cycle of initial audit, surveillance audits and re-audit, with special and unannounced audits.

02

Management and the regulatory processes

QMS planning, outsourcing, competence, document and record control, management review; marketing authorization, facility registration and notification of changes in each jurisdiction.

03

Measurement, analysis and improvement, and reporting

Quality data, investigations, CAPA, nonconforming product, internal audit and complaints; adverse event reporting and advisory notices, with the timeframes of each regulator.

04

Design, production and purchasing

Design and development from planning to transfer and change, production and service controls including validation and traceability, and supplier control.

05

The annexes

Technical documentation, sterile devices, the Japanese QMS Ordinance and the acceptable exclusions of devices and jurisdictions.

Outline

19 modules, in the order the process runs

The course follows the sequence of the work rather than the numbering of the regulation, and ends where the work ends.

00

Introduction

What the course covers and how each task is read
01

Structure of the Audit Approach

Audit sequence, linkages, structure of a task, terminology
02

The MDSAP audit cycle

Initial audit, surveillance, re-audit, special and unannounced audits
03

Management, Tasks 1 to 6

Planning, management representative, policy, structure, outsourcing, competence
04

Management, Tasks 7 to 11

Risk management, documents and records, management review, distribution
05

Marketing authorization and facility registration

Chapter 2, Tasks 1 and 2, by jurisdiction
06

Notification of changes

Chapter 2, Task 3, by jurisdiction
07

Measurement, analysis and improvement, Tasks 1 to 11

Quality data, investigation, CAPA, nonconforming product, internal audit
08

Measurement, analysis and improvement, Tasks 12 to 16

Post-production information and complaints
09

Adverse event reporting

Chapter 4, Task 1, and the reporting timeframes
10

Advisory notices

Chapter 4, Task 2, by jurisdiction
11

Design and development, Tasks 1 to 9

Scope, planning, inputs, outputs, risk management
12

Design and development, Tasks 10 to 17

Validation, clinical evaluation, software, changes, transfer
13

Production and service controls, Tasks 1 to 9

Planning, controlled conditions, environment, process validation
14

Production and service controls, Tasks 10 to 18

Monitoring, equipment, software, device master file, traceability
15

Production and service controls, Tasks 19 to 29

Status, acceptance, nonconformity, preservation, distribution, servicing
16

Purchasing, Tasks 1 to 12

Planning, supplier selection, monitoring, purchasing information
17

Annex 1 and Annex 2

Technical documentation and technologies; sterile devices
18

Annex 4 and Annex 5

Japanese QMS Ordinance; acceptable exclusions
FIN

Final test

Covering the whole course

Outcomes

What you will be able to do

01

A map of the audit

Which process each task belongs to, in what order it is audited, and which other processes it links to.

02

A reference for every task

The ISO 13485:2016 clauses and the regulation of each jurisdiction behind it.

03

The country requirements, side by side

What applies only in Australia, Brazil, Canada, Japan or the United States, task by task.

04

A procedure or record for every task

The workbook lists every task of the seven chapters with a line for the document in your QMS that answers it.

05

A justified scope

Which devices and jurisdictions may be excluded, and on what condition.

Format

Designed to be worked through, not watched

Self-paced and fully online, with progress saved to your account and every module replayable. Transcripts are downloadable, so the content stays searchable long after the video is finished. Access does not expire, and revisions made after your purchase are included.

Audience

Who the course is for

  • Quality and regulatory managers of organisations in, or entering, the MDSAP
  • Process owners who need the tasks of their own process
  • Internal auditors planning audits against the Audit Approach
  • Consultants supporting organisations across several jurisdictions

It assumes familiarity with medical device regulation and with a quality management system. It does not assume prior study of the articles and annexes it covers.

Certificate

Verifiable by a third party

On passing the final test, the certificate carries a verification code derived from your name and the date of completion.

An employer, an auditor or a client can confirm it on a public page, and it can be filed as training evidence under your quality system.

MDR-XXXX-XXXX  ·  mdregulatory.com/verify

Questions

Before you enrol

Does the course cover all five jurisdictions?

Yes. Australia, Brazil, Canada, Japan and the United States, with the additional country-specific requirements of each task.

Do I need the MDSAP Documentation Kit?

No. Some modules show extracts from the kit templates, and the workbook works with any quality management system.

Do I need a copy of ISO 13485:2016?

Not for the course. You will need it to map the clauses to your own procedures.

How long do I have access?

Access does not expire. The course stays in your account, including any updates made to the modules after your purchase.

Is there a certificate?

Yes. Passing the final test issues a certificate with a verification code, which anyone can check on our verification page.

Can I watch the modules in any order?

The modules unlock in sequence, because each one builds on the previous. Once unlocked, a module stays available and can be rewatched.

Do I need any prior knowledge?

The course assumes you work in the sector and know what a technical file and a notified body are. No knowledge of the specific technology is assumed.

Can my company buy several seats?

Yes. Write to us and we will set up team access with a single invoice.

Course and kit

The course explains the reasoning. The kit gives you the structure.

The workbook included with the course is a gap analysis of your own documentation, arranged in the order an assessment runs. Working through it produces a list of what is missing or partial in your file.

That list maps to the templates in the MDSAP Documentation Kit.

See the kit

Enrol

Every task of the seven chapters, with the requirements of each jurisdiction — in the order the audit runs.

19 modules, 3h 45min of video, downloadable transcripts, workbook and certificate. Self-paced, with no expiry.

MD Regulatory Academy

Regulatory consulting and documentation for medical device manufacturers — ISO 13485, EU MDR, FDA QMSR, MDSAP.

All courses  ·  Kits  ·  Consulting  ·  Contact