ISO 13485 Internal Audit Checklist (Excel)
€69.00
ISO 13485 & MDSAP Ready
Editable Word & Excel
ISO 13485 / MDSAP / FDA QMSR
ISO 13485:2016 · §8.2.4 · MDSAP AU P0002 · GHTF/SG3/N19
ISO 13485 Internal Audit Checklist (Excel)
Eighty-four audit questions across clauses 4 to 8, each mapped to its MDSAP process, with the evidence to sample and a grade from 1 to 5 calculated for every nonconformity.
€69
VAT calculated at checkout
Excel .xlsx · 84 questions · 4 sheets
Instant download
A checklist that only asks whether the procedure exists
Most internal audit checklists turn each clause of ISO 13485 into a yes-or-no question: is there a procedure for complaint handling, is there a calibration programme, is there a management review. The auditor ticks the box, the report says the system conforms, and the external auditor then samples five complaint files and finds one closed without investigation.
A checklist that works asks what to sample, not only what to look for. It records which records were reviewed, so the result can be checked. It grades each nonconformity the way a certification body or an MDSAP Auditing Organization will, so a finding that would be a grade 4 externally is treated as one internally. And it shows which MDSAP processes the programme has covered and which it has not.
None of this is difficult. It is the consequence of treating the checklist as a list of clauses rather than as the plan for what evidence the audit will collect.
- 84 questions
- Clauses 4 to 8
- Excel .xlsx
- Grade calculated 1 to 5
- MDSAP process mapping
- Instant download
Scope
What the checklist covers
Every clause of ISO 13485:2016 from 4.1 to 8.5.3, with questions written in our own words: the checklist does not reproduce the text of the standard, which is protected by copyright, so keep your licensed copy at hand.
01
Questions with evidence
For each question, the records to sample: complaint files, batch records, design change records, calibration records, CAPA files. The audit collects evidence instead of confirming that a document exists.
02
Grading built in
Each question carries the QMS impact of its clause. Mark a nonconformity, answer three escalation questions, and the grade from 1 to 5 is calculated with the GHTF/SG3/N19:2012 method applied under MDSAP.
03
Coverage you can show
A summary sheet counts results by clause, coverage by MDSAP process and nonconformities by grade, and flags when the results would trigger an MDSAP 5-day notice.
Contents
Four sheets, in the order you use them
Audience
Who the checklist is for
- Internal auditors preparing an ISO 13485 audit
- Quality managers planning the annual audit programme
- Manufacturers preparing an initial or recertification MDSAP audit
- Consultants running gap audits or mock audits for clients
- Suppliers audited by medical device manufacturers
The checklist assumes you have the ISO 13485:2016 standard and a documented quality management system to audit. It does not replace an internal audit procedure or programme.
What is included
What you get when you buy
- 1 Excel .xlsx workbook, fully editable
- 84 audit questions with the evidence to sample
- Result drop-downs and grade calculation for every question
- A summary sheet with coverage by clause and by MDSAP process
Questions
Before you buy
Do I need the ISO 13485 standard?
Yes. The questions are written in our own words and do not reproduce the standard. Use the checklist with your licensed copy of ISO 13485:2016.
Is this enough for an MDSAP audit?
No. It covers ISO 13485 and maps each question to the MDSAP process where it is examined. MDSAP also checks the regulations of each country you sell in, which need their own procedures and records.
How is the grade calculated?
Clauses 4.1 to 6.3 (except 4.2.3) and 8.2.4 start at grade 1; clause 4.2.3 and clauses 6.4 to 8.5 start at grade 3. One point is added for a repeat, for a process neither documented nor implemented, and for release of a nonconforming device. The maximum is 5.
Can I add my own questions?
Yes. Insert a row, copy the grade formula from the row above, and the summary sheet includes it.
Does it work for supplier audits?
Yes, for suppliers that run an ISO 13485 system. Select “Supplier audit” as the audit type and audit only the rows in scope; mark the others N/A.
How is it different from the Internal Audit Package?
The package gives you the procedure, the annual programme, the audit plan and the audit report. This checklist is the working tool used during the audit. They are designed to be used together.
What software do I need?
Microsoft Excel or a compatible spreadsheet that supports drop-down lists and conditional formatting. It also works in LibreOffice Calc.
Is this a one-off purchase?
Yes. The licence is for single-organisation use, and the file is yours to keep.
Checklist and process
The checklist runs the audit. The package runs the programme.
The Internal Audit Package gives you the internal audit procedure, the risk-based annual programme, the audit plan and the audit report, for €69. The checklist is the tool your auditors use inside each audit that programme schedules.
ISO 13485 Internal Audit Checklist (Excel)
84 questions, clauses 4 to 8, evidence to sample, MDSAP process mapping and a grade calculated for every nonconformity.
€69.00



